Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  €480.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  €560.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Delivery time 10-15 days
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  €1,004.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/400
  • Thread:  M8
In Stock - Despatched 1-2 Days
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Price:  €279.00
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
In Stock - Despatched 1-2 Days
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Price:  €22.00
Quick Overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
In Stock - Despatched 1-2 Days
Corner Bracket
ID: FV-CNRBRKT
Price:  €52.00
Quick Overview:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Part Number:  FV-CNRBRKT
In Stock - Despatched 1-2 Days
Vee Block Single
ID: FV-VEE
Price:  €32.00
Quick Overview:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Part Number:  FV-VEE
In Stock - Despatched 1-2 Days
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Price:  €475.00
Quick Overview:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Part Number:  FX-BASIC/KIT
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
In Stock - Despatched 1-2 Days
Articulated Fixture Arm (M8)
ID: FX-ARM
Price:  €142.00
Quick Overview:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Part Number:  FX-ARM
  • Thread:  M8
In Stock - Despatched 1-2 Days
Slider Block (M4)
ID: FV-SLIDER
Price:  €18.00
Quick Overview:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FV-SLIDER
  • Thread:  M4
In Stock - Despatched 1-2 Days
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Price:  €18.00
Quick Overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Part Number:  FV-SO/MAG
  • Length:  10 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Spring Clamp (M4)
ID: FV-SPRING
Price:  €46.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FV-SPRING
  • Thread:  M4
In Stock - Despatched 1-2 Days
Resting Cone (M4)
ID: FV-CONE
Price:  €15.00
Quick Overview:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FV-CONE
  • Thread:  M4
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Price:  €3,715.00
Quick Overview:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-240AL3
  • Outside Diameter Chuck (D1):  240
  • Clamping Range Outside (A):  1 - 288
  • Clamping Range Inside (I):  35 - 295
  • Fixing:  M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Price:  €1,565.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Price:  €987.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Price:  €930.00
Quick Overview: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing (G):  M3
Delivery time 10-15 days
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Price:  €1,420.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing (G):  M6
Delivery time 10-15 days
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Price:  €1,490.00
Quick Overview:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing (G):  M6
Delivery time 10-15 days
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Price:  €3,300.00
Quick Overview:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-240AL3-NF
  • Outside Diameter Chuck (D1):  240
  • Clamping Range Outside (A):  1 - 288
  • Clamping Range Inside (I):  35 - 295
  • Fixing (G):  M8
Delivery time 10-15 days